Athena 1090 EVO, Translation Of Original Instructions, Page: 55 / 182

55
Identification Function and Status Description of the function
power source.
The internal combustion engine
operates at an accelerated rate
7 Button
WARNING BUZZER
8 Selector switch
DRIVING MODE SELECTOR
CENTRAL position Standard operation - traction
FORWARD/REVERSE enabled using 2
joysticks
DC-S position Simultaneous movement
FORWARD/REVERSE of the tracks
with the RH joystick only (11)
ED-S position
Easy Drive System assisted drive
control system
9 Selector switch
TRAVEL SPEED SELECTOR
TURTLE position
Low speed for all movements +
Dynamic levelling OFF
HARE position
High speed for all movements +
Dynamic levelling ON
10 LH joystick
Left track FORWARD/REVERSE travel
control
11 RH joystick
Right track FORWARD/REVERSE
travel control
12 Selector switch Left levelling
13 Selector switch Right levelling
14 Selector switch Longitudinal levelling
15 Selector switch Ascent / descent
16 Indicator light
REMOTE CONTROL BATTERY STATUS INDICATOR (if present)
17
Emergency
Button
EMERGENCY STOP
3.2.2 Ground control using the mobile push-button panel
With the mobile control push-button panel, as well as allowing for the normal
operation of the work platform, it is possible to temporarily remove and use the
machine from the ground.
This is allowed only for travel operations with the work platform at a height
lower than the transport height.