Athena 1090 EVO, Translation Of Original Instructions, Page: 126 / 182

126
working life, limit any problems that may arise and reduce the running costs of
the machine.
Comply with the following instructions:
•
Charge the battery in ventilated areas.
•
Keep open flames well away from the battery since explosive gases may
form.
•
Do not make temporary electrical connection that fail to comply with the
regulations in force.
•
Do not place tools or any other metal object on the battery.
•
Clean any encrustations from the battery terminals and always tighten
them correctly.
•
Always keep the battery clean, dry and free from oxidation.
•
If the battery is replaced, always comply with the instructions supplied
with it.
6.2.9.2 Maintenance
The batteries chosen by ALMAC S.r.l. and installed on all models are of the
“
maintenance-free
”
type. These batteries feature construction technology that
reduces water consumption to a considerable extent and maintains the
electrolyte for the entire life cycle of the batteries themselves.
6.2.9.3 Recharging
Recharge the battery only in ventilated areas.
Warning: when charging, gas develops that in certain conditions can create
EXPLOSIVE ATMOSPHERES.
Always recharge batteries in well ventilated places that conform to standards EN
60079-10 (IEC 31-30), where there is no risk of fire outbreaks and where suitable
extinguishers are ready to hand.
6.2.9.3.1 Charging method No. 1 with 12V battery charger