® Copyright ATH-Heinl GmbH & Co. KG, 2019, All rights reserved / Misprints and technical changes reserved / As of: 2019-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 11 -
1.3.5. Starting the balancing process
Start the balancing process using the
STARTbutton or by closing the wheel protector
/
Turn the wheel until all the diodes on the display
light up
The weight must then be applied to the wheel.
The machine provides you with the following aids
to ensure precise positioning:
Programme
Internal
weight
External
weight
DYN
12 o'clock
position
(laser)
12 o'clock
position
STA
12 o'clock position (laser)
ALU1
12 o'clock
position
(laser)
12 o'clock
position
ALU2
12 o'clock
position
(laser)
Weight
recording on
the gauge
arm
ALUS
Weight
recording on
the gauge
arm
Weight
recording on
the gauge
arm
a)
HID function
-
The HID function allows you to position the external balancing weight in a hidden spot behind the
spokes.
-
This function is available in ALU2 and ALUS mode.
After the balancing process, the HID programme
can be started by pressing the T + OPT buttons
+
The display then shows SPO – 12H.
Turn the wheel until all the diodes on the display
for the external position light up.
Confirm this position using ALU
