® Copyright by ATH-Heinl GmbH & Co. KG, 2019, All rights reserved / Misprint and technical changes reserved / Issue: 2019/02
- 23 -
Adjustment of the mounting head
In case of working predominantly with big wheels until
24“respectively
small
8“wheels
it is
recommendable to adapt the mounting head adjustment to the rim diameter.
The adjustment of the mounting head will be explained in the chapter MAINTENANCE.
Tilt respectively swivel the mounting head into the working position
and loosen the arrestor for positioning and putting it manually on the
rim edge. In this connection, the guiding roll (3) respectively the
plastic grinding part (for light alloy rims) may touch the corresponding
rim outline.
By arresting the mounting head, it will remove automatically away
from the rim in height and distance. At the type M32 there must be
additionally fitted the adjustment wheel for the swinging arm.
The adjustment of the automatic distance is explained in the subitem
“
Maintenance and S
ervice works”
.
It is recommendable to use plastic braces respectively a plastic
mounting head when mounting rims of light alloy for not damaging
them.
Summary of Contents for M72Z
Page 1: ...USER S MANUAL ATH M72Z...
