5/12
1.4 Quality guaranteed
1.4.1 General
SLAM Star is designed, certified, manufactured and tested under ISO 9001:2008 quality system as
well as additional requirements of the Directive 94/9/EC (ATEX) or IECEx scheme. SLAM Star is
designed and tested according to the latest directives and standards. The referred directives and
standards of the production date in case are stated on the Declaration of Conformity included in
the delivery.
1.4.2 Individual test report
Each SLAM Star unit has its own individual serial number and is provided with an original,
individual test report when leaving the factory. The year of manufacture is specified on the type
label of the equipment. Following tests have been done for SLAM Star units according to standards
relating to portable luminaries for explosion hazardous area. The Declaration of Conformity is
specifying the relevant standards. The test report which is included in the delivery specifies the
results of the factory tests for that particular unit. The test report typically specifies the following
tests.
PE –resistance test
The purpose of this test is to measure persistence of earth conductor. Vital test for electrical safety
as well as explosion safety because of e.g static electricity control. The test current is 10 A (current)
and the overall resistance should not exceed 0,5
Ω
.
High voltage test (electrical strength)
The purpose of this test is to measure leakage current through insulation. Vital test for revealing
broken components or similar failures which can not be identified visually. Testing voltage applied
is 2130 VDC. Maximum leakage current is 5 mA.
Test of expected use of equipment
The luminary is subjected to shaking and vibration – to see that all the internal wires are properly
attached and components are not loose.
Operational test of luminaire and accessories
The unit is plugged-in and checked that it is working properly after all accomplished tests above.
Visual inspection
A final check to see everything is fine (screws attached properly, wires connected and required
markings attached).
1.4.3 Warranty
SLAM Star units have two-year warranty from purchasing date. You will find detailed warranty
conditions from
www.atexor.com
.
