14/16
3) Only original spare parts from the manufacturer should be used. Please note that there are no
components in this unit which can be repaired by using glue, silicone or any other similar method.
4) The green colour on transparent parts of Slam® Hornet Emergency may be damaged because of
external affects like solvents or chemicals or mechanical stress. In case the green colour has
disappeared in one area greater than 100 cm
2
the part has to be changed. The surface resistance of the
transparent parts has to be between 1 MΩ - 1 GΩ.
5) Maintenance instructions with exploded-view diagram and spare parts list are available at your local
distributor and the manufacturer. Please, when requesting maintenance instructions with exploded-view
diagrams, include the model and serial number of the product.
4.3 Testing
Tests are to be done according to EN 60079-19 until returning the repaired unit back to operation. Below
mentioned tests shall be done in addition to the tests specified in EN 60079-19
PE
–resistance test
High-voltage test (500 VDC between Phase& Neutral against P/E conductor)
Operational test
Test of expected use (vibrations, shaking)
Proper testing ensure safe operation of repaired equipment.
4.4 Repair report
The operator is responsible for keeping up to date record of the condition of his equipment (EN 60079-14).
Ensuring the availability of this important information each repair procedure should be written down in repair
report according to EN 60079-19.
This report should reveal at least:
Person who conducted the maintenance
Date of maintenance
Procedure of maintenance
Signature of person responsible accepting the maintenance
4.5 Periodical testing of CentaurSlam Hornet Emergency
Before test, allow battery to be fully charged. Operation of the battery must be checked 4 times a year by cutting
off the input voltage. Operation time in battery mode should be over 45 minutes. If not, luminary is to be serviced.
Summary of Contents for Slam Hornet Emergency 18+40W
Page 2: ...2 16...
