12/16
4) The in-built socket is only for chaining Slam® Hornet Emergency -units.
5) Fix them with accessories you have selected
6) Take the chain into Ex
–area
Amount of lights which may be connected with each other depends on the supply voltage. Here you may see
general guide-lines for linking with 5 m 3x1.5mm
2
(or 3x2.5mm
2
) cable each:
Supply
voltage
Recommended
max. load
Type of luminary
Number of
luminaries in series
230 V
2000 W
CSHEM1840 (58
W)
27
110 V
1000 W
CSHEM1840 (58
W)
13
42 V
500 W
CSHEM1840 (58
W)
6
24 V
290 W
CSHEM1840 (58
W)
4
The Slam® Hornet Emergency ballast protects itself against excessive voltage drops (numerous linking) by
switching itself off. If too many units are connected to the chain, some units of the chain will switch off. You may
start up by unplugging the last units on the line.
Voltage peaks are more harmful and may damage the ballast permanently when subjected to excessive peaks
continuously.
If fluorescent tubes are flickering when the units are chained up, it may be due to excessive linking. This may
shorten notably the lifetime of fluorescent tube. Unplug the last unit on the line to ensure proper function of the
unit.
3.8 Special operating features of Slam® Hornet Emergency
Connect luminaire to mains/transformer. Push power button on the end part to turn lamps on
and off. Power button has green integrated standby/power LED to ease finding button at dark
enviroments and indicating lamp is powered. All Slam® Hornet Emergency -units are
equipped with Li-Ion battery backup to allowing 18W fluorecent lamp illuminate during power
failures. By using power button the operation of battery-back up can be controlled (ON
/OFF).Battery is charging whenever device is connected to mains/transformer. Optional Red
charging LED (between fluorescent lamps) illuminates during charge. Battery is fully charged
when red charging LED turns off.
Summary of Contents for Slam Hornet Emergency 18+40W
Page 2: ...2 16...
