Atest Gaz Teta Gas, Manual Book

Page: 19 / 24

www.atestgaz.pl
If any civil engineering or building (finishing) jobs could have been performed yet after
installation of the Gas Detection & Safety System a test of all detectors is mandatory to make
sure that detectors correctly respond to presence of hazardous gases.
The gas monitoring system can be approved for operation only after passing results of all
aforementioned checks and verifications.
6.3 Maintenance schedule
6.3.1 Calibration
Please refer to relevant User Manuals for specific equipment for detailed information about calibration.
6.3.2 Replacement of fast wearing parts
Please refer to relevant User Manuals for specific equipment for detailed information about replacement of
wearing parts and consumables.
6.3.3 Test of safety functions
Execution of the test for safety functions is recommended once a year. Test gas is supplied to one unit of
each detector type and response of all components within the Gas Detection&Safety System is checked
together with all collaborating systems (e.g. ventilation).
s. 19|19
User Manual: POD-047-ENG R03