Atest Gaz Teta Gas, Manual Book

Page: 13 / 24

www.atestgaz.pl
Cable No.
(see Figure 5)
Recommended
cable type
Insulation
strength
Example of
the cable type
Additional remarks
6 Three-core cable > 300 V YDY 3x1.5 -
7 - - - Details related to cabling between the shutoff valve
and the Control V valve controller can be found in the
Operation Manual for the controller.
Table 4: Cables applicable for interconnections within the system
The total cable length for the Teta Bus interconnections must not exceed 1 km.
4.8 Selection of a bus cable for gas detectors
Cable length and cross-section for the bus deployment can be established by means of the Teta System
Configurator software (see Section 4.2).
5 System architectures
Typical solutions for architectures of a Gas Detection System are shown in Figures 1, 2 and 3.
5.1 Schematic diagrams of interconnections
Examples of schematic diagrams for interconnections within systems are shown in subsequent figures.
Detailed schematic diagrams in an editable format can be found on our website
http://doc.atestgaz.pl/AG/PROJ/PROJ-LIB-037.dwg .
s. 13|19
User Manual: POD-047-ENG R03