www.atestgaz.pl
8.3.2
Test for the system with an open control loop
To carry out the test for a system with an open control loop please remove the lid of the last detector of the
loop and depress the TEST button inside the enclosure.
8.4
Periodical operations
The device should be subjected to periodic inspection of its technical condition. It is the user's
responsibility.
8.4.1
Maintenance
Except cleaning the external part of the enclosure, the device does not require any maintenance. The
external part of the enclosure should be cleaned by means of a soft cloth moistened with water and a bit of
a mild detergent.
The control unit module must be reliably secured during any repair, installation or maintenance works.
8.5
Utilization
This symbol on a product or on its packaging indicates that the product
must not be disposed of with other household waste. Instead, it is the
user's responsibility to ensure disposal of waste equipment by handing it
over to a designated collection point for the recycling of waste electrical
and electronic equipment. The proper recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the
environment. Information about relevant designated collection points can
be obtained from the Local Authority, waste disposal companies and in the
place of purchase. The equipment can also be returned to the
manufacturer.
s. 11|13
User Manual: POD-015-ENG R02
