- 10 -
Operation
The Video Matrix Switch operates according to the following
parameters:
For example, if you want the signal from
Input Port 1
to be
displayed on the device connected to
Output Port 2
, press the
switch that corresponds to
Output Port 2
until the switch’s
IN 2
LED lights to indicate that it is receiving the signal from
Input
Port 1
.
Each front panel switch corresponds to an output
port.
Press the switch to select the input source for
display on the device connected to the
corresponding output port.
Pressing a switch toggles between the two input
ports. Continue pressing a switch until the desired
input source is selected.
The built-in LEDs indicate which input source is
selected:
Green LED On indicates display from Input 1.
Orange LED On indicates display from Input 2.
2
1
VS-0202_0204_manual.fm Page 10 Friday, March 3, 2006 3:51 PM
