Chapter 3. Operation
22
System Settings
To access the system settings, follow the steps below.
1. Press the
Menu
button/pushbutton. The System Settings menu appears on
Display A.
2. Navigate to the setting you wish to configure.
3. Press the
Enter
button/pushbutton to select an option. The selected option
appears in square brackets for the setting.
Refer to the table below for an overview of the VP1920’s settings.
System Setting
Description
Note:
Default settings are indicated in bold.
General
Settings
Info OSD
Enable
Disable
Displays the current source, audio,
I/O, and display mode settings for
Display A and B.
RS-232 Baud
Rate
9600
19200
38400
115200
Sets the baud rate for RS-232
communications.
Panel Auto Lock
5s later
30s later
5 mins later
Disable
Sets the VP1920 to automatically
lock the panel pushbuttons when
they have been idled for the
selected duration.
USB
KB/Mouse
Auto
Source 1
Source 2
Sets the source that can be
controlled by the VP1920’s
console keyboard and mouse.
Note:
The source must also be
assigned to Display A for this
function to work.
Select
Auto
to allow Source 1 or
Source 2 to be controlled by the
VP1920’s console keyboard and
mouse, depending on which
source is assigned to Display A.
