ATEN VP1420, User Manual

Page: 28 / 118

Chapter 2. Hardware Setup
18
Under Desk Mount
The VP1420 / VP1421 can be installed under a desk. To conveniently access
the front panel for local configuration and operation, install the unit with the front
panel facing forward.
Note: The mounting kit required for this installation is not included in the
package. Visit the product web page for more information.
1. Use the M3 Phillips hex head screws supplied with the mounting kit to
secure the mounting brackets onto the unit.
2. Position the unit to a spot under the desk where you can easily access the
front panel, and then secure the racks to the desk with self-prepared
screws.