VM7904
4-Port 4K DisplayPort Input Board Quick Start Guide
Hardware Review
VM7904 Front View
1. DisplayPort Input Ports
2. Audio Input Ports
3. Status LED
Hardware Setup
I/O Board Installation
An ATEN 16 x 16 Modular Matrix Switch is used as an example in the
instructions below. For a list of compatible Modular Matrix Switches,
please visit our official website.
1. Power off the Modular Matrix Switch.
Note:
The VM7904 is hot-swappable.
2. On the rear of the Modular Matrix Switch, unscrew the two Phillips
head screws and remove a back panel cover.
3. Slide the VM7904 into any of the Input Board Slots (4 upper slots) on
the Modular Matrix Switch until it secures in place.
4. Tighten the screws on the VM7904 to fasten it to the Modular Matrix
Switch.
5. To install more I/O boards, repeat steps 2 to 4.
6. Proceed to the next section to install a source device.
VM7904 Front View
1
2
3
Package Contents
1 VM7904 4-Port 4K DisplayPort Input Board
4 Terminal Blocks
1 User Instructions