background image

VM5404H / VM5808H User Manual

ii

Compliance Statements

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE 
STATEMENT 

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user 
will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

FCC Caution 

Any changes or modifications not expressly approved by the party responsible 
for compliance could void the user's authority to operate this equipment.

Warning

Operation of this equipment in a residential environment could cause radio 
interference. 

Achtung

Der Gebrauch dieses Geräts in Wohnumgebung kann Funkstörungen 
verursachen.

KCC Statement

Summary of Contents for VM5404H
































































































































Reviews: