Modular Matrix Solution User Manual
52
Note:
By default the password requirement is disabled. If the password is
enabled, the LCD display’s default time-out is 5 minutes.
5. Press
Menu
to return to the Menu page.
6. Press
Cancel
to return to the previous step without saving.
Change Password
1. To change the password: from Security Mode, press pushbutton
2
.
2. In the Old Password field, the cursor flashes at the first digit. Enter the old
, page 32). If the old password is entered
correctly, you can proceed to the next step. The default password is:
1234
.
Note:
If you enter an incorrect password, the cursor goes back to the first digit
and reverts to flashing. The Incorrect Password message clears as soon
as a new digit is entered.
3. In the New Password field, the cursor flashes at the first digit. Enter the
new password using the front panel number pushbuttons (1111–9999).
4. Re-enter the new password in the following screen. The new password is
applied by the VM1600 immediately.
1: Mode
2: Change Password
Old Password : * * * *
Old Password : * * * *
New Password: * * * *
