ATEN VM0808H, User Manual

Page: 27 / 78

Chapter 3. Front Panel Operation
17
Main Screen
The Main screen displays Output Ports 1–8 in sequential order across the top.
The Input source displaying on each Output port is shown directly beneath it.
From the Main screen, you can set the Input-to-Output connections that route
the signals from a selected Input port to the selected Output port. To do so,
simply change the Input source port associated for each Output display by
doing the following:
1. Turn the OUT tuner dial to select the input port you want to change.
When the cursor [ ] highlights the selected input port, use the IN tuner dial
and turn it left or right to cycle through the available input sources.
Options are: Ports 1–8, NA (none)
2. Press the OUT , IN , or ENTER pushbutton to confirm your selection. The
signal from the selected input port is now tied to the output port above it.
3. Repeat steps 1–3 for all required ports.
ESC
ENTER PROFILE
MENU
[ ]
OUTPUT 01 02 03 04 05 06 07 08
INPUT 01 02 03 04 05 06 07 08
OUT
IN
F00