Chapter 4. RS-232 Commands
31
Possible Values
The following table shows the possible values for switch commands:EDID
EDID Command Table
Mute Commands:
The formulas for Mute commands are as follows:
1. Mute C Output C Port C [Enter]
For example, to mute output port 05 on device 01, type the following:
mute o05 on [Enter]
2. Mute C Output C Port C [Enter]
For example, turn on audio at output port 05 on device 01, type the following:
mute o05 off [Enter]
Command
Description
edid
EDID mode selection
Control
Description
port1
Implement all display’s EDID according to port1
remix
Use the EDID of the connected displays -according
to the connection when first powered on.
auto
Use the EDID detected for each connection and set
the best resolution for all.
default
Implement default EDID for all
Enter
Description
[Enter Key]
Send out command
Command
Control
Enter
Description
edid
port1
[Enter Key]
The EDID from port1 will be passed to all
video sources.
edid
remix
[Enter Key]
Uses the EDID of the connected display
according to each connection when the
VM0808 is powered on.
edid
auto
[Enter Key]
All connected displays EDID will be
detected and the best resolution for all will
be selected as they are connected.
edid
default
[Enter Key]
The default EDID will be passed to all
video sources.
