14
ID, Network & License Configuration
Setting Control Box ID
For VK1200 / VK2200, use the LCD panel on the front panel to set its ID.
For VK1100A / VK2100A, use the Control Box ID switch to set its ID.
Note:
Take note of the control box ID, which should be unique and unrepeated
if there are other controllers within the same subnet.
Determining the IP Address
The network information of the VK1200 / VK2200 can be found on its LCD
panel, via
Information
, as illustrated below.
VK1100A / VK2100A
VK1200 / VK2200
DHCP
When connected to a DHCP network, the control box is assigned with
an IP address automatically upon startup.
Non-DHCP
When no dynamic IP address is assigned to it within 30 seconds after
startup, the control box’s default network settings are applied:
LAN
Default IP Address:
192.168.0.60
Subnet Mask:
255.255.255.0
LAN
Default IP Address:
192.168.1.60
Subnet Mask:
255.255.255.0
Control LAN (CLAN)
Default IP Address:
192.168.0.60
Subnet Mask:
255.255.255.0
