ATEN VK1100, User Manual

Page: 146 / 176

ATEN Control System User Manual
136
Š
Settings – Use the drop-down menu to select TELNET, PJLINK, ONVIF,
or TCP and enter the Port number.
Š
Advanced
Š
Function List – Use this section to configure the device functions by
adding actions to the list.
String Format – Use the buttons to select HEX or ASCII . (TCP only)
Function – Lists the actions created for a device. A Function name
must include an Astrix (*) for each drop menu you add to the Command
string. Double-click to edit the function name. The drop-down menu
will appear where the (*) is entered in the Function name
Command – Shows the command string created for the action. Double-
click to edit the string.
Feedback – Provides the Return Messages when the Retrieve and
Send buttons are used to test the command strings (Telnet, PJLink, and
TCP only).
Retrieve – Use to test the Command string and receive return messages
from a device.
Delay Interval Use the Delay Interval drop-down menu to set a time delay for each
command before they are sent to the device.
Delay after login Sets a delay (to allow a connection to be established) before the
First and Second Commands are sent to the device.
Send command
after connection Enter a First and Second Command to send to the device after a
successful connection has been established.
Automatically
reconnect if no
return message is
received Check this box if you want to continue reconnection attempts when
no return message is received from the device.
Use Default Click this button to reset back to the default settings.