ATEN VK1100, User Manual

Page: 100 / 176

ATEN Control System User Manual
90
Advanced Options
Advanced Options allow you to include conditions with a commands in the
Commands list. Associate
Set Flag , Condition , Change Button State or
Change Label functions with a command in the Commands list by dragging
and dropping them into a tree view listed with the command, so that they
initiate in the order listed.
Š
Set Flag – add a Set Flag to change a Flag’s value when a command
changes a device setting. This sets the Flag value to match the new device
setting (e.g. ON or OFF). Always add a Set Flag to a Condition Flag ,
after the device action(s):
To add a Set Flag:
1. Under Device , select Set Flag .
2. From the Function list, select the Flag .
3. From the Function list, drag and drop the Flag to add it to the end of the
Condition Flag , in a tree view list:
4. Double-click Set Flag in the Commands list to use the drop-down menus
to set the Flag and Value .