Chapter 2. Hardware Setup
8
Connecting the VE2812T Unit
Follow the steps below to connect the VE2812T to a source, a compatible ATEN
Video Extender, and other controls as required.
1. Use an HDMI or VGA cable to connect the HDMI or VGA Out port on your
source device to the HDMI or VGA In port.
Note:
For a VGA source, make sure to also connect a VGA audio jack to
the Audio In port on the VE2812T unit to transmit audio.
2. Connect one end of the RJ-45 cable to the HDBaseT Output port on the
VE2812T, and the other end to the HDBaseT Input port on your video
extender receiver.
3. (Optional) Connect your computer or control system to the RS-232 Port on
the VE2812T.
4. (Optional) Connect an IR transmitter/receiver to the IR port.
5. Plug the Power Adapter Cable into the Power Jack.
VE2812T (Front)
VE2812T (Rear)
A compatible ATEN
Video Extender Receiver
2
2
3
4
5
1
or
