ATEN VE2812EUT, User Manual

Page: 22 / 38

VE2812UST / VE2812EUT User Manual
12
Connecting the VE2812UST / VE2812EUT Unit
Follow the steps below to connect the VE2812UST / VE2812EUT to a source,
a compatible ATEN Video Extender, and other controls as required.
1. Use an HDMI or VGA cable to connect the HDMI or VGA Out port on your
source device to the HDMI or VGA In port.
Note: For a VGA source, make sure to also connect a VGA audio jack to
the Audio In port on the VE2812UST / VE2812EUT unit to transmit
audio.
2. Connect one end of the RJ-45 cable to the HDBaseT Output port on the
VE2812UST / VE2812EUT, and the other end to the HDBaseT Input port
on your video extender receiver.
3. (Optional) Connect your computer or control system to the RS-232 Serial
Port on the VE2812UST / VE2812EUT.
4
VE1812 Receiver
Top View Side View
VE2812UST
VE2812EUT
Top View Side View
VE1812 Receiver
Top View
1
1
1
5
3
2
1 1
4
1
5
3
2