ATEN VanCryst VM3200 User Manual Download Page 17 | Manualshive

Page: 17 / 209

background image

1

Chapter 1

Introduction

Overview

The ATEN Modular Matrix Switch (VM3200) / Modular Matrix Switch Gen.
2 (VM3250) offers advanced access and real-time control of multiple local and
remote AV input devices and displays from a single chassis. The VM3200 /
VM3250 allows users to independently switch and route video and/or audio
content to various monitors, displays, and projectors. The built-in Scaler
encodes the video format in order to provide seamless, real-time switching.
High-quality video outputs are ensured with EDID Expert™, which selects the
optimum resolutions.

The VM7584 and VM8584 (4-Port 10G Optical Input / Output Board) offer an
easy way for the VM3200 / VM3250 to route 4 HDMI sources over long
distances via optical extenders, the VE883 to 4 HDMI-enabled displays. These
I/O boards are able to route uncompressed 4K signal to the VM3200 / VM3250
from up to 300 m (VM7584K1 and VM8584K1) or 10 km (VM7584K2 and
VM8584K2) away over duplex fiber optic cables. On top of audio and video
signal, the optical fiber also guarantees an interference-free long-haul
transmission of IR and RS-232 control signals.

The VM7514 / VM8514 4-Port HDBaseT Input/Output Boards offers an easy
way to route any of 4 HDBaseT audio/video sources to any of 4 HDBaseT
display devices, in combination with the ATEN Modular Matrix Switch. When
the VM8514 HDBaseT Output Board is used in conjunction with the VE805R
HDBaseT Receiver or VE816R 4K HDMI HDBaseT Receiver with Scaler, it
features Seamless Switch technology and video wall functionality.

The VM7904 is a 4-Port 4K DisplayPort Input Board that works with an ATEN
Modular Matrix Switch to offer an easy way that routes 4 DisplayPort video
and audio sources to up to 16 or 32 displays. In addition to the DisplayPort
interface that carries digital AV signal, the VM7904 also provides 4 stereo
audio input ports that allow stereo audio to be routed independently or
embedded for HDMI output. Ideal for high-resolution video wall applications,
the VM7904 effectively routes DisplayPort sources with 4K resolution up to

«
...
15
16
17
18
19
...
»

Summary of Contents for VanCryst VM3200


















































































































































































































Reviews:

No comments

Related manuals for VanCryst VM3200

Brand: D-Link Pages: 2

RackSwitch G8332

Brand: IBM Pages: 18

Brand: Kathrein Pages: 8

Brand: Nayar Systems Pages: 21

Brand: Kathrein Pages: 24

Brand: Kasia Pages: 5

Brand: Ubiquiti Pages: 24

Brand: Ubiquiti Pages: 13

Brand: Ubisys Pages: 2

Brand: IBM Pages: 166

Brand: netvox Pages: 14

Brand: N-Tron Pages: 196

Brand: CYP Pages: 20

Hi-Speed USB 2.0 Hub

Brand: Saitek Pages: 14

Brand: Dahua Pages: 12

JTECH-4K88-EX-RX

Brand: J-TECH Pages: 40

AVlink VAX-8404F

Brand: C&C TECHNIC Pages: 2

Brand: Omron Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands