ATEN VanCryst VE8900, User Manual

Page: 97 / 122

Chapter 6. CLI Commands
85
Enabling / Disabling the HDCP of a Transmitter
To enable or disable the HDCP of a specified VE8900 / VE8950 / VE8952
transmitter, type the command in this format:
hdcp + a<port> | i<port> + on | off + \r\n
Examples
 To enable the HDCP of a VE8900 transmitter with the IP address of
10.0.90.30, type
hdcp a10.0.90.30 on
 To enable the HDCP of a VE8900 transmitter with the ID of 3, type hdcp
i3 on
Control Description
a<port> Indicates the MAC ID or the IP address of the target VE8900 / VE8950
/ VE8952 transmitter.
i<port> Indicates the device ID, MAC ID, or the IP address of the target input
source (VE8900 / VE8950 / VE8952 transmitter) device. Use an
asterisk (*) to target all VE8900 / VE8950 / VE8952 transmitters in the
environment.
on Enables the HDCP of the specified VE8900 / VE8950 / VE8952
transmitter.
off Disables the HDCP of the specified VE8900 / VE8950 / VE8952
transmitter.
\r\n Ends the command.