ATEN VanCryst VE8900, User Manual

Page: 95 / 122

Chapter 6. CLI Commands
83
Setting the Audio Source of a Transmitter
To set the audio source for a specified VE8900 / VE8950 / VE8952 transmitter,
type the command in this format:
au a<port> | i<port> + <source> + \r\n
Examples
 To set the HDMI audio source of a VE8900 transmitter with the IP address
of 10.0.90.19, type
audiomap a10.0.90.19 hdmi
 To set the analog audio source of a VE8900 transmitter with the IP address
of 10.0.90.19, type
audiomap a10.0.90.19 analog
Control Description
a<port> Indicates the MAC ID or the IP address of the target VE8900 / VE8950
/ VE8952 transmitter.
i<port> Indicates the device ID of the target input source (VE8900 / VE8950 /
VE8952 transmitter) device. Use an asterisk (*) to target all VE8900 /
VE8950 / VE8952 transmitters in the environment.
<source> Indicates the audio source to which you wish to set the target
transmitter. Valid inputs include
analog and hdmi .
\r\n Ends the command.