ATEN VanCryst VE8900, User Manual

Page: 83 / 122

Chapter 6. CLI Commands
71
Disabling Video, USB, RS-232, and/or IR Paths
Use this command to disable video, USB, RS-232 and/or IR transmission paths
for the specified VE8900 / VE8950 / VE8952 receiver. To use this function,
type the command in this format:
sw + o<port> + all | video | usb | serial | ir + off + \R\N
Example
 To disable the video, USB, RS-232, and IR paths for a VE8900 receiver
with an ID of 4, type
sw o4 all off
Control Description
o<port> Indicates the device ID of the output (VE8900 / VE8950 / VE8952
receiver) device.
all Stands for all transmissions paths, including video, USB, and IR of the
specified receiver.
video Stands for video path of the specified receiver.
usb Stands for USB path of the specified receiver.
serial Stands for RS-232 path of the specified receiver.
ir Stands for IR path of the specified receiver.
\r\n Ends the command.