ATEN VanCryst VE8900 User Manual Download Page 103

Page: 103 / 122

Chapter 7. Mobile Control App

Live Views

To see live views for your displays, follow the steps below.

1. In the VE8950 Mobile Control App, tap the

Live

icon. A list of video

walls and/or displays appear, along with their selected sources.

2. Scroll up and down to view the list. If you have installed new display

devices or made changes to the settings, tap

Sync

to refresh.

Switching a Source

1. In the VE8950 Mobile Control App, tap the

Live

icon.

2. Tap any area on the receiver or the video wall for which you wish to

change the source.

Tap this icon to configure the schedules of existing
profiles. For details on creating a new profile, see

Profile

, page 44.

Tap this icon to configure system settings or
upgrade transmitter/receiver firmware.

No.

Component

Description

Summary of Contents for VanCryst VE8900



























































































































Search results

Summary of Contents for VanCryst VE8900

Reviews:

Brands by name

Popular brands

ATEN VanCryst VE8900, User Manual

Search results

Summary of Contents for VanCryst VE8900

Reviews:

Brands by name

Popular brands