ATEN StreamLIVE PRO UC9040, User Manual

Page: 69 / 88

59
Chapter 7
Quick Live-Stream Setup
Setup
Before you start live-streaming, you need to setup your live-stream platform on
the UC9040.
Setting these up can be on any interface (PC, laptop, tablets, etc.) as long as you
are able to get the
Server URL and Stream Key .
This section will therefore take you through obtaining the Server URL and
Stream Key, input them into the ATEN OnAir PRO app, synchronize the ATEN
OnAir PRO app with the UC9040 and start streaming using your iPad.
Follow the steps below:
Note: Facebook is the streaming platform example used in the setup steps
below.
1. On the iPad, open Safari (Internet browser) and go to the Facebook page.
Note: Make sure your iPad is Internet-enabled and is using desktop mode.
If your iPad is always bringing you to the facebook app (or youtube,
twitch, etc.), remove it from the system first and install it again later.
2. Log into your account.
3. On the dashboard, locate and tap the What’s on your mind field.
4. Tap to select Live Video .