Chapter 1. Introduction
4
Requirements
Browsers accessing the eco PDU must support TLS 1.0.
For cold booting of attached computers, the computer's BIOS must
support
Wake on LAN
or
System after AC Back
.
For Safe Shutdown:
The computer must be running Windows (2000 or above) or Linux.
The
Safe Shutdown
program — PMonitor — must be installed and
running on the computer (available by download from our website or
on the software CD included).
Note:
Safe shutdown program PMonitor can be downloaded from the
Support and Download
section of the product web page, as shown
below
Cable Holders
Cable holders are optional accessories. For added safety, use ATEN Lok-U-
Plug cable holders to secure the cables from your attached devices in place on
the eco PDU. Only the ATEN Lok-U-Plug cable holders that have been
specifically designed to work with the eco PDU can be used. Using any other
kinds of cable securing device could potentially result in irreversible damage
or harm to the device or users. For a list of compatible cable holders, please
refer to the Compatible Products section on the product web page.
Summary of Contents for PG98230 Series
