ATEN PE7216r, User Manual

Page: 23 / 117

Chapter 1. Introduction
13
Port and LED Panel
No. Item Description
1 Status, ID
and
Selected
LEDs Š
Power: Lights when the unit is powered up and ready to
operate.
Š
PDU/Phase / Bank / IP – see ID DIsplay Section, below.
Š
Sensor 1 / Sensor 2 / Reset
1 ID Display
Section Š
The ID of the selected PDU/Phase / Bank / IP appears in the
LED display window.
Š
When the PDU/Phase LED is lit, use the Up and Down
buttons to move forward or backward through the following
sequence: 01
→
b1
→
b2
→
01
(Station
→
Bank1
→
Bank2
→
Station)
Š
When the Outlet LED is lit, use the Up and Down buttons to
move forward or backward through the outlets: 01
→
02
→
03
→
... 01 (Outlet1
→
Outlet2
→
Outlet3
→
... Outlet1)
Š
In a daisy chain installation, hold down both the Up and Down
buttons for three seconds simultaneously to toggle between
Station and Outlets.
2 Readout
Section
Š
When Station / Bank / Outlet is selected, readouts for Current,
Voltage and Power Dissipation appear in the display window.
Š
Press the button next to the LED display window to cycle the
selection between the items; the LEDs next to the items
indicate which one the display relates to.
Š
When a sensor is selected, the display shows temperature /
humidity / differential pressure according to the sensor type
1 3
5
2
7
LAN
SENSOR
1 2
SELECT
POWER
PDU
/ PHASE
BANK
IP
SENSOR 1
SENSOR 2
RESET
4
6