4. OSD Operation
37
(Continued from previous page.)
Setting
Function
RESET STATION
IDS
If you change the position of one of the Stations in the daisy chain,
the OSD settings will no longer correspond to the new situation.
This function directs the OSD to rescan the Station positions of the
entire installation and updates the OSD so that the OSD Station
information corresponds to the new physical layout.
Note
: Only the Station Numbers get updated. Except for the Port
Names, all Administrator settings (such as Set Accessible Ports,
Set Quick View Ports, etc.), for all of the computers affected by the
change, have to be manually redone.
FIRMWARE
UPGRADE
In order to upgrade the CL-1208 / CL-1216's firmware (see
Chapter 6), you must first enable
Firmware Upgrade Mode
with this
setting.
When you bring up this menu, the current firmware version levels
display. Select
Y
to enable Firmware Upgrade Mode, or
N
to leave
this menu without enabling it.
SET CONSOLE
MODE
This setting selects which consoles (internal/external) are enabled:
0
Both consoles enabled
1
LCD console only
2
External console only
Use the spacebar to cycle to the choice you want. The default is 0.
cl12816_v2.book Page 37 Thursday, March 23, 2006 2:21 PM
