ATEN KE6900R, User Manual

Page: 317 / 324

Appendix
299
Keys to Network Performance
For optimum performance, KE Series devices requires high amounts of data to
be transferred across a network; therefore we recommend the following
strategies to setup KE Series devices. Using our suggestions will provide better
performance and the highest video resolutions possible. Use each of the keys
to ensure the best transmission of data and the highest throughput possible.
Build a Network Diagram
To build an effective KE installation, start by mapping out the layout. Create a
diagram with the KE devices, computers and routers along with how they will
be connected across the network. It also helps to write out how the devices will
interact. Use this diagram as the frame work as you decide what devices to
purchase and how to build the network effectively for the best data throughput.
Considerations:
 If possible, create a private network for the KE devices
 Use the same switch model throughout
 Use a flat cascaded layout
 Avoid a tree or pyramid structure
 Limit cascades to two levels
 Install network switches near each other
 Minimize the distance of connections
 Install KE Matrix Manager (CCKM) computer and KE devices on the
same subnet
 Check the 3 Other Factors before installation
Other Factors
 Choose the Right Cable
Always use Cat 5/6e Ethernet cable or higher installed by a professional
between any two devices you are installing. We recommend using ATEN
Brand Ethernet cable to ensure the quality. It’s best when installing KE devices
to use brand new Ethernet cabling for each part of the installation to ensure the
reliability of the data being transmitted. This is a key to getting the best
uninterrupted video resolution across the network.