ATEN KA8270, User Manual

Page: 103 / 116

Chapter 6. Toolbar Interface
91
5. Read refers to the redirected device being able to send data to the remote
server; Write refers to the redirected device being able to have data from
the remote server written to it. For the redirected device to be writable as
well as readable, click to put a check in the
Enable Write checkbox:
Note: If a redirected device cannot be written to, it appears in gray.
6. To remove an entry from the list, select it and click the trash can icon.
7. After you have made your media source selections, click Mount . The
dialog box closes. The virtual media devices that you have selected are
redirected to the remote server, where they show up as drives on the
remote server’s file system.
Once mounted, you can treat the virtual media as if they really existed on
the remote server – drag and drop files to/from them; open files on the
remote server for editing and save them to the redirected media, etc.
8. To end the redirection, bring up the Control Panel and click on the Virtual
Media icon. All mounted devices are automatically unmounted.
Message Board
The KVM over IP console station supports multiple user logins, which may
cause access conflicts. To alleviate the problem, a message board has been
provided, which allows users to communicate with each other.