Chapter 4. RS-232 Operation
23
Command Verification
After entering a command, a verification message appears at the end of the
command line as follows:
Command OK
- indicates that the command is correct and successfully
performed by the switch
Command incorrect
- indicates that the command has the wrong format
and/or values.
Commands
After connecting to the VM0202H / VM0202HB via Telnet or RS-232, you can
operate the system using the following commands.
Switch Port Command
The Switch Port command allows you to switch ports on the VM0202H /
VM0202HB.
The formula for the Switch command is as follows:
C Input + C [Enter]
1. For example, to switch input port 02 (audio and video) to output port 01,
type:
sw i02 o01 [Enter]
2. To turn off video and audio output on port 02, type:
sw o02 off [Enter]
3. To switch the next output to port 02, type:
sw i02
+
[Enter]
The following tables show the possible values for the
Switch Port
command:
Command
Description
sw
Switch command
Input Command
Description
i
Input command
Port number
Description
xx
01-02 port (default is 01)
