VM0202H / VM0202HB User Manual
18
Audio Output Pushbutton
To manually select or extract an audio output source from the connected HDMI
source devices, use the Audio Output Pushbutton located on the VM0202HB’s
front panel to select an audio output.
Note:
This Audio Output Pushbutton is only available on VM0202HB.
Pressing the Audio Output Pushbutton will cycle between the two attached
HDMI source devices (source 1 and 2).
Audio Channel Switch
The Audio Channel Switch allows you to bypass or set audio CH 2 for the
connected speakers.
IR Remote Control Operation
The IR remote control (
, page 8) included with the
VM0202H / VM0202HB can be used to:
Change the input source of any output display
Power on/off individual output display
Power on/off all output displays simultaneously
Before using the remote control, a user must first plug the IR Receiver into the
rear panel of the VM0202H / VM0202HB and place the receiver where the IR
signal can be reached (see
Audio Output Pushbutton
Audio Channel Switch
