ATEN CS19208, User Manual

Page: 94 / 108

CS19208 / CS19216 User Manual
84
OSD Configuration Backup/Restore
The Firmware Management Utility lets you backup the current OSD
configuration of the CS19208 / CS19216, and restore it when necessary.
Storing the OSD configuration settings is useful when deploying more than one
installation that uses the same settings.
Backup
Follow these steps to store a backup file to a local computer:
1. Make sure your computer is connected to the CS19208 / CS19216.
See Preparation , page 78, and follow steps 1–3.
2. When you have selected the F4 Admin function, scroll down to OSD
Config Backup / Restore. Press [Enter] , then select Enable to invoke
OSD Config Backup / Restore mode.
3. Run the Firmware Management Utility. In the dialog box, choose OSD
Configuration Backup/Restore , then click Next.
4. In the window that appears, click Connect Device .
5. In the Password field, key in a password for the file.
Note: Setting a password is optional. If you do not set one, the file can be
restored without specifying a password.
6. Click Backup .
7. When the browser asks what you want to do with the file, select Save to
disk , then save it in a convenient location.