ATEN CS1842, User Manual

Page: 44 / 88

CS1842 / CS1844 User Manual
32
HSM Summary Table
After invoking HSM (see page 26), key in one of the following keys to perform
the corresponding function:
Key Function
[F1] Sets the keyboard and mouse to SPC mode so that it can work
under special operating systems as a standard (104 key)
keyboard and mouse.
[F2] Enables Mac keyboard emulation.
[F3] Enables Sun keyboard emulation.
[F4] Print the switch’s current settings via a text editor or word
processor.
[F5] Performs a USB keyboard and mouse reset.
[F6] [n][n] [Enter] Sets the keyboard language layout. Where nn is a two digit
number that represents the keyboard language code (US
English: 33, French: 08, German: 09, Japanese: 15).
[F10] Enables Windows keyboard emulation.
[B] Enables/disables the buzzer.
[E] Turns the Power-on-Detection function on/off.
[H] Toggles between the default and alternate HSM invocation keys.
[K] [Enter] Enables/disables N-key rollover keyboard supporting function.
[M] Enables/disables mouse emulation.
[N] Enables/disables keyboard emulation.
[R] [Enter] Resets the Hotkey settings to their default status.
[S] Toggles between the default and alternate manual port selection
pushbutton settings.
[T] Toggles between the default and alternate Port Switching keys.
[u] [p] [g] [r] [a] [d]
[e] [Enter]
Invokes Firmware Upgrade Mode.
[W] Enables/disables Mouse Port Switching. When enabled, click the
mouse wheel twice to switch ports. Mouse emulation must be
enabled.