ATEN CS1842, User Manual

Page: 30 / 88

CS1842 / CS1844 User Manual
18
Mouse Switching
For mouse port selection: Double-click the scroll wheel of your USB mouse to
cycle through the ports.
Note: 1. Mouse switching is only supported by USB 3-key scroll wheel mice.
2. Mouse switching is disabled by default. See Hotkey Setting Mode
(HSM) , page 26, to enable mouse switching.
3. Mouse switching is only supported when Mouse Emulation is
enabled.
Hotkey Switching
For Hotkey port selection: All port switches from the keyboard begin by
pressing the Scroll Lock key twice. Regarding details of the Hotkey
parameters, see
Hotkey Operation , page 21.
Remote Port Selector Switching
For Remote Port Selection: Press the remote port selector button to cycle
through the ports. Make sure the remote port selector is plugged into the
Remote Port Selector Jack.
RS-232 Commands
For RS-232 port selection: Enter the correct command and control to switch
port. Regarding details of the RS-232 command and control, see
Switch Port ,
page 42.
Hot Plugging
The CS1842 / CS1844 supports USB hot plugging – components can be
removed and added back into the installation by unplugging their cables from
the USB hub ports without the need to shut the unit down.