CS1782 User Manual
26
5. Invoke Firmware Upgrade Mode (see page 18).
The front panel LEDs flash together to indicate Firmware Upgrade Mode
is in effect.
Starting the Upgrade
To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file – either by double
clicking the file icon, or by opening a command line and entering the full
path to it.
The
Firmware Upgrade Utility
Welcome screen appears:
Note:
The screens shown in this section are for reference only. The
wording and layout of the actual screens put up by the Firmware
Upgrade Utility may vary slightly from these examples.
2. Read the License Agreement (enable the
I Agree
radio button).
3. Click
Next
to continue. The Firmware Upgrade Utility main screen
appears:
cs1782.book Page 26 Thursday, June 12, 2008 2:28 PM
