ATEN CS1708i User Manual Download Page 174

Page: 174 / 216

CS1708i / CS1716i User Manual

158

Panel Array Mode

Clicking the toolbar's

Panel

icon invokes Panel Array Mode. Under this mode,

the screen divides into a grid of panels:



Each panel represents one of the switch’s ports beginning with Port 1 at
the upper left, and going from left to right; top to bottom.



The number of panels in the array can be selected by clicking the

Show

More Ports

, and

Show Fewer Ports

symbols on the panel array toolbar

(see the following page for an explanation of the panel array toolbar).



Only ports that are accessible to the user are displayed. For ports that are
not accessible, the panel is blank.



If the server connected to a port is on line, its screen displays in its panel,
otherwise the panel is blank.



Mousing over a panel displays information about the port (port name,
online status, port access status, and resolution).



You can access a server connected to a port by moving the mouse pointer
over its panel and clicking. You switch to the server exactly as if you had
selected it from the Port Access page.

Summary of Contents for CS1708i

























































































































































































































Search results

Summary of Contents for CS1708i

Reviews:

Related manuals for CS1708i

Brands by name

Popular brands

ATEN CS1708i, User Manual

Search results

Summary of Contents for CS1708i

Reviews:

Related manuals for CS1708i

Brands by name

Popular brands