ATEN CN8000A, User Manual

Page: 20 / 207

CN8000A User Manual
6
System Requirements
Servers
Servers are the computers connected to the switch via KVM Cables (see
Terminology , page xiii). The following equipment must be installed on these
servers:
Š
A VGA, SVGA or multisync port
Š
For USB KVM Cable Connections: Type A USB port and USB host
controller
Š
For PS/2 KVM Cable Connections: 6-pin Mini-DIN keyboard and mouse
ports
Cables
Š
A custom KVM cable set (USB; PS/2) to link the CN8000A to a server or
KVM switch are provided with this package.
Š
Custom KVM cable sets are available in various lengths, as shown in the
table below:
To purchase additional cable sets, contact your dealer.
Š
One custom Console cable set to link the CN8000A to a local console is
provided with this package.
Cable Type Length CS Part Number
PS/2 1.2 m
2L-5201P
1.8 m
2L-5202P
1.8 m
2L-5702P
3.0 m
2L-5203P
6.0 m
2L-5206P
USB 1.2 m
2L-5201U
1.8 m
2L-5202U
3.0 m
2L-5203U
5.0 m
2L-5205U
PS/2-USB 1.2 m
2L-5301UP
1.8 m
2L-5302UP
3.0 m
2L-5303UP