ATEN CN8000A, User Manual

Page: 133 / 207

7. The JavaClient Viewer
119
User Macros
User Macros are used to perform specific actions on the remote server. To
create the macro, do the following:
1. Select the User Macros radio button, then click Add .
User Macro operation is the same under the JavaClient as it is under the
WinClient. See
User Macros , page 87, for details.
System Macros
System Macros are used to create exit macros for when you close a session. For
example, as an added measure of security, you could create a macro that sends
the Winkey-L combination which would cause the remote device’s login page
to come up the next time the device was accessed. To create the macro, do the
following:
1. Select System Macros , then click Add .
System Macro operation is the same under the JavaClient as it is under the
WinClient. See
System Macros , page 91, for details.