ATEN CN8000A, User Manual

Page: 103 / 207

6. The WinClient Viewer
89
5. If you haven’t brought up the Show dialog, click Done when you have
finished recording your macro. You return to the Macros dialog box with
the macro keys that you pressed displayed in the Macro column:
6. If you want to change any of the keystrokes, select the macro and click
Edit . This brings up a dialog box similar to the one for Show. You can
change the content of your keystrokes, change their order, etc.
7. Repeat the procedure for any other macros you wish to create.
Running Macros
After creating your macros, you can run them in any of three ways:
1. By using the hotkey (if one was assigned).
2. By opening the Macro List on the Control Panel and clicking the one you
want (see Macro List , page 83).
3. By opening this dialog box and clicking Play .
If you run the macro from this dialog box, you
have the option of specifying how the macro runs.
Š
If you choose Play Without Wait , the macro
runs the keypresses one after another with no time delay between them.