ATEN CN8000, User Manual, Page: 81 / 208

4. Administration
67
Log
The CN8000 logs all the events that take place on it. Following a reset, it writes
them to a log file, which can be used as a searchable database with a log server.
To view the contents of the log file, click
Log under the Preference menu. A
screen similar to the one below appears:
A maximum of 512 events are kept in the log file. As new events are recorded,
they are placed at the bottom of the list. When a new event is recorded after
there are 512 events in the log file, the earliest event in the list is discarded.
Note: To maintain and view a record of all the events that take place (not just
the most recent 512), set up the Log Server AP program. see
The Log
Server , page 119.
To clear the log file, click on the Clear Log icon at the lower right of the page.
Language Selects the language that the interface displays in. Drop down the list to
make your selection.
Selecting
Auto causes the CN8000 to display the pages in the same
language that the browser is set to.
Note: If your browser is set to a non-supported language, the CN8000
looks to what your server’s operating system is set to. If the operating
system is set to a supported language it will use that language to display
its pages. If the operating system is set to a non-supported language, the
CN8000 defaults to English.
After making your choice, click
Apply .
Change
Password To change your password, key the new password into the New Password
input box; key the exact same characters into the Confirm New Password
input box; then click
Change Password to set the new password.
Setting Function