ATEN CN8000, User Manual, Page: 147 / 208

8. AP Operation
133
The Java Client AP
The Java Client AP is provided to make the CN8000 accessible to all platforms.
Systems that have JRE 6 Update 3 or higher installed can connect. If you don't
already have Java, it is available for free download from Sun's Java web site
(http://java.sun.com).
Starting Up
To connect to the CN8000 with the stand-alone Java Client program, copy
iClientJ.jar to a convenient location on your hard disk; then double-click its
icon – or key in the full path to the program on the command line – to bring up
the Java Client Connection screen.
Note: If this is the first time that you are running the program a dialog box
appears requesting you to input your serial number.
The serial number can be found on the CN8000's CD case. Key in the
serial number - 5 characters per box - then click
OK to bring up the
CN8000 Connection Screen.
After performing this operation the first time you run the program, this
dialog box doesn’t appear again – you go directly to the Java Client
Connection screen.