ATEN CN8000, User Manual, Page: 137 / 208

7. The Log Server
123
A description of the items is given in the table below:
Maintenance
This function allows the administrator to perform manual maintenance of the
database if the CN8000 misses the automatic maintenance.
Item Explanation
New search This is one of three radio buttons that define the scope of the
search. If it is selected, the search is performed on all the
events in the database for the selected CN8000.
Search last results This is a secondary search performed on the events that
resulted from the last search.
Search excluding last
results This is a secondary search performed on all the events in the
database for the selected CN8000
excluding the events that
resulted from the last search.
Server List CN8000 units are listed according to their IP address. Select
the unit that you want to perform the search on from this list.
You can select more than one unit for the search. If no units
are selected, the search is performed on all of them.
Priority List Sets the level for how detailed the search results display
should be.
Least is the most general; Most is the most
specific. Least results appear in black; Less results appear in
blue; Most results appear in red.
Start Date Select the date that you want the search to start from. The
format follows the YYYY/MM/DD convention, as follows:
2009/11/04
Start Time Select the time that you want the search to start from.
End Date Select the date that you want the search to end at.
End Time Select the time that you want the search to end at.
Pattern Key in the pattern that you are searching for here. The
multiple character wildcard (*) is supported. E.g., h*ds would
match
hands and hoods .
Results Lists the events that contained matches for the search.
Search Click this button to start the search.
Print Click this button to print the search results.
Export Click this button to write the search results to a .txt file.
Exit Click this button to exit the Search dialog box.