manualshive.com logo in svg

ATEN CN8000, User Manual, Page: 134 / 208

Share
Download
ATEN CN8000 User Manual Download Page 134

CN8000 User Manual

120

Starting Up

To bring up the Log Server, either double click the program icon, or key in the 
full path to the program on the command line. The first time you run it, a screen 
similar to the one below appears:

Note:

1. The MAC address of the Log Server computer must be specified in 

the 

ANMS - Event Destination

 settings – see 

Log Server

, page 42 for 

details.

2. The Log Server requires the Microsoft Jet OLEDB 4.0 driver. See 

The 

Log Server program does not run.

, page 183 if the program doesn’t 

start.

The screen is divided into three components:

Š

A 

Menu Bar

 at the top

Š

A panel that will contain a list of CN8000 units in the middle (see 

The Log 

Server Main Screen

, page 125, for details).

Š

A panel that will contain an 

Events List

 at the bottom

Each of the components is explained in the sections that follow.

Summary of Contents for CN8000

















































































































































































































Reviews:

No comments