ATEN CM1164A, User Manual

Page: 131 / 152

Chapter 6. RS-232 Operation
119
Note:
1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
Display Aspect Ratio
The Display Aspect Ratio command allows you to set display aspect ratio for
Quad, PbP (Dual), PbP (Triple), and PbP (Quad) display modes. Type your
command in the following format:
C C [Enter]
For example, to set the display aspect ratio to full screen, type the following:
ratio full [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
Command Description
ratio Display Aspect Ratio Command
Control Description
full Scales the display modes to full screen.
16:9 Sets the display aspect ratio to 16:9.
4:3 Sets the display aspect ration to 4:3.