CE610A User Manual
11
Setting Up
Setting up the CE610A DVI KVM Extender system is simply a matter of
plugging in the cables. Make sure that all the equipment to be connected are
powered off. Refer to the installation diagram on the following page and do the
following:
1. Connect the USB cable supplied with the package to the
USB Type B port
on the Local Unit (CE610AL). Plug the other end of the cable into a USB
Type A port on the local computer.
2. Connect the DVI-D cable supplied with the package to the
DVI-D input
port
located on the Local Unit (CE610AL). Plug the other end of the cable
into the DVI port on the local computer.
3. Plug either end of the Cat 5e cable into the CE610A's Unit to Unit
R-J45
port
. Plug the other end of the Cat 5e cable into the Unit to Unit
RJ-45
port
of the Remote Unit (CE610AR).
4. Plug one of the power adapters (supplied with this package) into a power
source; plug the adapter's power cable into the CE610AL's
Power Jack
.
5. Use a DVI cable to connect the
DVI-D output port
on the Remote Unit
(CE610AR) to your monitor.
6. Plug the cables from the remote USB devices (mouse, keyboard, etc.), into
their respective
USB ports
on the Remote Unit CE610AR.
7. Plug the second power adapter (supplied with this package) into a power
source; plug the adapter's power cable into the CE610AR's
Power Jack
.
